How to make an ATV the easiest
Today ATVs are very popular. They are widely used not only for pleasure walks, but also for hunting and fishing. Some villagers use this technique for a variety of village jobs, because, in fact, it's the same mini-tractor. But not every such machine can be accessible, so it is so important to have information about how to make a quad by using improvised materials.
Before you make an ATV, you need to prepare everything, and for this you can not do without:
- welding machine;
- profiles, pipes, corners of various sizes;
- additional equipment;
- units and assemblies taken from mopeds and motorcycles.
Be sure to start working with the drawing of the future"the iron horse". Therefore, we take a sheet of paper and make a sketch. Before you make an ATV, the main thing is to plan which parts and components you will buy and which ones to do yourself. It is also necessary to carefully draw the relative position of all the units and assemblies so that they can be assembled without problems.
Secrets of assembly
Frame for the ATV is welded using pipes withround section, corners and square profiles. It is advisable at the same time to use elements of various mopeds and motorcycles, because it is there that use pipes with high strength.
Do not use waterpipes. They do not have the necessary strength and can crack at any time. Then weld the mounting brackets and fix the motor to the frame. It's better to make your first quad bike out of a moped engine.
He will like even your children, who fromhe will be just delighted. The fact is that children's ATVs on gasoline are an excellent toy for every child. After all, he does not develop huge speeds, but there will be more than enough emotions to overcome the cross-country terrain.
Next, connect the motor shaft to the rear axle gear using a chain. We install on the steering column mechanisms for controlling the ATV, and on the frame we attach pedals and levers.
The power and ignition system is taken from the samemodel of a moped, from which we took the engine. Through time, they can be improved and modified in reasonable, of course, limits. Select the fuel tank can be a motorcycle corresponding to the volume.
Do not forget also the moment, that in the question of how to make an ATV, each stage must be thoroughly worked out. Therefore, installing a battery on such a machine is simply necessary.
Also, you should plan which bridges you will use in the ATV. The best solution in this case are the aggregates from sidecars and cargo scooters.
Steering is necessary to make,having applied two drafts, which will turn the front wheels. The brake lever is connected to the transmission brake using traction. All exterior panels of the homemade ATV are made with fiberglass.
I would like to say separately how to makecaterpillar tracks for ATV. The best option here is to buy ready-made nodes entirely, and then attach them to the ATV. After all, the caterpillars of suitable properties and characteristics are difficult to find on other machines. Therefore, we are not very wise, but we are buying everything ready.
Applying these tips and recommendations in practice, you can create a real masterpiece of mechanical engineering, saving money and raising your authority in the eyes of friends and acquaintances.